Mold remediation
Water damage drying
Fire & smoke cleanup
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateTrusted Mold Remediation for Fort Worth Homeowners
Mold in a Fort Worth home is rarely just a surface stain. By the time you see it on drywall, trim, or ceiling corners, the colony has usually been feeding inside the wall cavity for weeks. North Texas humidity, flat-roof runoff during spring storms, and slab foundations that trap moisture under flooring all give mold exactly what it needs to spread fast. We’ve been doing Fort Worth Mold Remediation since 2006, following IICRC protocol on every job, and our technicians can typically be at your door the same day you call. Blake Sorensen leads our Fort Worth team, and the number to reach us is (682) 432-0584.
Before any work starts, you get a written price. Not a vague estimate range on a voicemail. A line-item scope in writing, followed by a digital invoice you pay from a link. That’s how Wendell Restoration Fort Worth operates, and it’s the reason homeowners across Tarrant County call us instead of rolling the dice with whoever Google surfaces first.
Mold Removal Service
Mold Removal Service is the physical removal of active mold colonies from affected materials inside your Fort Worth home, including drywall, baseboards, carpet, insulation, and framing. You need it when visible mold covers more than about 10 square feet, when a musty odor lingers after cleaning, or when a water event like a roof leak or pipe burst happened more than 48 hours ago. Wendell Restoration Fort Worth handles the full scope: containment setup, HEPA-filtered air scrubbing, material removal, antimicrobial treatment, and moisture correction. Expect to pay between $500 and $1,500 for a contained bathroom ceiling or closet, $1,500 to $4,000 for a standard room, and $6,000 and up when multiple rooms or HVAC ducting are involved.
Containment and Air Filtration
Before we open a single wall, we seal off the work area with 6-mil polyethylene and run negative air pressure using HEPA-filtered air scrubbers. That keeps spores from drifting into your living room, kitchen, and bedrooms during demolition. We use equipment from XPOWER and Phoenix on most Fort Worth jobs.
Material Removal and Disposal
Porous materials with visible mold growth, like drywall and carpet pad, get cut out and bagged on site for legal disposal. Non-porous surfaces like tile and framing get HEPA-vacuumed, scrubbed with an EPA-registered antimicrobial, and dried to a moisture content below 16 percent. You’ll see before-and-after photos by text at each stage.
Restoration work we handle
Mold Remediation Services
Mold Remediation Services go beyond wiping away surface mold. They address the moisture source that caused the growth in the first place, because killing mold without fixing the leak or humidity problem means it returns in weeks. In Fort Worth, where summer dew points sit above 70 degrees for months, that moisture correction step is not optional. Wendell Restoration Fort Worth combines source removal, structural drying, and post-remediation verification into one documented process. Typical remediation services run $1,800 to $5,500 depending on square footage, with crawlspace projects in neighborhoods like Ridglea Hills and Arlington Heights often landing between $3,000 and $7,000.
Moisture Mapping and Source Correction
We use infrared cameras and penetrating moisture meters to find where water is entering. It might be a roof valley flashing above a second-story ceiling, a sweating AC plenum in an unconditioned attic, or a slow slab leak under LVP flooring. Until that source is fixed, mold is a timing problem, not a mystery.
Post-Remediation Verification
After the work area is cleaned and dried, we run air samples and surface swabs to confirm spore counts match the outdoor baseline. You get the lab results and the moisture readings in writing. If anything is off, we return and correct it under the 365-Day Done Right Promise, at no charge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Professional Mold Removal
Professional Mold Removal is the difference between treating a symptom and solving a structural problem. DIY bleach sprays kill surface mold on tile but do nothing for colonies inside wall cavities, under shower pans, or behind baseboards, and they can actually add moisture that feeds deeper growth. Wendell Restoration Fort Worth sends background-checked, uniformed technicians who follow IICRC, RIA, and IFA standards, the same protocols used on large commercial loss sites. Expect professional mold removal in Fort Worth to run $1,200 to $4,800 for most single-room projects, with whole-home or multi-room remediation starting around $6,000.
Why Surface Cleaning Fails
Mold has hyphae, root-like structures that penetrate porous building materials. Bleach evaporates before it penetrates, which means the visible stain fades for a few days and then returns darker. We remove the material, not just the color.
What “Professional” Actually Means Here
It means written documentation: a scope of work before we start, moisture readings during the job, lab results after. It means your price does not change at the door. It means you can track your technician’s arrival time live, the way you track a rideshare.
Mold Inspection
Mold Inspection is a structured assessment of your Fort Worth home for visible mold, hidden moisture, and elevated spore conditions, whether or not you have confirmed growth. You should schedule one if you smell mustiness but cannot see mold, if a recent water leak went untreated for more than two days, or if you are buying a home built before 2000 in areas like Wedgwood or Como where plumbing and roof age are risk factors. Wendell Restoration Fort Worth charges $250 to $450 for a standard visual and moisture inspection with a written report, and $400 to $1,000 when air sampling and lab analysis are included. If you hire us for remediation, we apply the inspection fee toward the job.
Visual and Moisture Assessment
We check the usual suspects first: attic sheathing under roof valleys, bathroom exhaust fan housings, baseboards near exterior walls, under-sink cabinets, and anywhere the slab has shown cracking. Infrared thermography helps us spot temperature differences that point to hidden moisture behind finished surfaces.
Air Sampling and Lab Analysis
When we pull air samples, we compare indoor spore counts to an outdoor control sample taken at the same time. The lab report tells you which species are present and at what concentration. You get a copy, and so does your insurance adjuster if a claim is open. We’ve coordinated directly with adjusters in Fort Worth for years, and it usually speeds things up.
Mold Removal Specialist
A Mold Removal Specialist is a technician certified in structural drying and microbial remediation, not a general handyman with a spray bottle. In Fort Worth, the specialists on our team hold IICRC certifications and train on the same equipment used on commercial restoration sites. You need a specialist when mold has spread behind walls, into HVAC ducts, or into a crawlspace, because those areas require containment, negative air pressure, and moisture control in sequence. Specialty mold removal in Fort Worth typically costs $2,000 to $6,500, with crawlspace encapsulation running higher due to access and material costs.
Our Technicians and Certifications
Every technician who walks through your door is background-checked, uniformed, and employed by Wendell Restoration Fort Worth, not subcontracted out. Blake Sorensen holds the team to IICRC, RIA, and IFA standards on every single job. You know who is coming before they arrive, and they arrive with a live arrival time you track from your phone.
When You Need More Than a Cleaning
A specialist matters when the affected area is large, when occupants have respiratory sensitivities, or when mold is in structural lumber. Those cases require controlled demolition, HEPA filtration, and sometimes dehumidification for days, not hours. We run professional-grade drying equipment from Dri-Eaz and B-Air, the same brands insurance companies spec on large loss claims.
Black Mold Removal
Black Mold Removal specifically targets Stachybotrys chartarum, the toxigenic species most homeowners worry about, plus other dark-pigmented molds like Cladosporium and Alternaria that look similar. You cannot identify black mold by color alone, which is why lab testing matters. Wendell Restoration Fort Worth treats every dark mold colony in Fort Worth as potentially toxigenic until lab results say otherwise. Black mold removal costs $2,500 to $7,000 for a contained area, and that price reflects the added PPE, containment, and clearance testing Stachybotrys requires under IICRC protocol.
Identification, Not Guesswork
A black stain on a bathroom ceiling might be Stachybotrys, or it might be surface mildew from shower steam. The difference is in the lab, not the eyeball. We tape-lift or swab the surface, send it to a certified lab, and you get the species identification in writing before we recommend a scope of work.
Clearance Testing After Removal
After black mold removal, we do not just hand you a bill and leave. We run post-remediation clearance testing, which means air samples inside the contained area compared against the outdoor baseline. The job is not done until the numbers say it is done. That clearance report is included in our written guarantee.
Mold Removal Contractor
A Mold Removal Contractor is a licensed entity that can legally perform remediation, pull necessary permits when structural work is involved, and document the entire process for insurance claims. In Texas, mold remediation contractors must follow state regulations on training, disclosure, and work practices. Wendell Restoration Fort Worth is that contractor: we carry insurance, we document everything with photos and moisture logs, and we coordinate directly with your adjuster. Hiring a mold removal contractor in Fort Worth typically costs $2,000 to $8,000 depending on the scope, and you should never hire one who refuses to put a scope in writing first.
Insurance Claims and Documentation
Most homeowner policies in Texas cover mold remediation when the mold resulted from a covered water event like a burst pipe or storm damage. The catch is documentation. We provide photo evidence at every stage, written moisture readings, and lab results in a format adjusters recognize. That is often the difference between a paid claim and a denied one.
Written Scope, Written Price, Written Guarantee
Before any work starts, you get a line-item scope of work and a price in writing. The number on the screen is the number you pay. Every job includes a written 365-Day Done Right Promise: if it is not done right, we make it right, and a free second visit if the repair fails.
Bathroom Mold Removal
Bathroom Mold Removal targets the most common mold location in Fort Worth homes: shower surrounds, tub decks, vanity cabinets, and the drywall above them. Constant humidity, poor exhaust ventilation, and slow plumbing drips make bathrooms the first room in the house to grow mold, and often the first place homeowners notice it. Wendell Restoration Fort Worth handles bathroom mold removal from the visible surface all the way back to the studs when needed. A typical bathroom mold removal in Fort Worth runs $900 to $3,500, depending on whether the shower pan, subfloor, or wall cavity is involved.
Shower and Tub Surrounds
Mold behind tile or fiberglass surrounds often means the waterproofing membrane has failed. We remove the affected surround material, inspect and treat the framing behind it, and dry the cavity thoroughly before any rebuild. This is a case where surface cleaning would be a waste of your money.
Vanity and Cabinet Areas
Slow leaks under bathroom sinks feed mold in cabinet bases and the drywall behind them. We replace the affected cabinet base when necessary, treat the framing, and dry the area with high-velocity air movers from Injectidry and XPOWER. You get photo updates of every layer we open.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We work with professional restoration equipment from Dri-Eaz, the industry standard for refrigerant dehumidifiers and high-capacity air movers. Our technicians are trained on their LGR (low grain refrigerant) dehumidifier line, which pulls moisture down to levels standard dehumidifiers cannot reach. That matters in Fort Worth, where ambient humidity fights every drying job.
We also run Phoenix and XPOWER equipment regularly. Phoenix desiccant dehumidifiers handle crawlspace and low-temperature drying jobs that refrigerant units struggle with. XPOWER air scrubbers and axial fans run the HEPA filtration and airflow on most of our containment setups. Whether your project needs Dri-Eaz, Phoenix, XPOWER, B-Air, or Injectidry equipment, the technician arriving at your door knows how to run it to IICRC spec and will explain what each piece does in plain language.
Signs You Need a Pro Right Now
- Musty smell you cannot locate. That earthy, damp smell is microbial volatile organic compounds off-gassing from active mold. When you smell it but cannot see it, the colony is usually hidden inside a wall, under flooring, or in the HVAC system.
- Visible mold covering more than a dinner plate. Ten square feet of visible mold almost always means more is hidden behind the surface. At that scale, DIY cleaning spreads spores throughout the house while leaving the roots intact.
- Water event more than 48 hours ago. Mold starts growing within 24 to 48 hours on wet drywall, carpet, and insulation. If a pipe burst, roof leaked, or appliance overflowed more than two days ago, assume mold is developing and get a professional assessment.
- Family members with new or worsening allergies. Sneezing, coughing, headaches, or asthma flare-ups that improve when you leave the house point to indoor air quality issues. Mold spores are a leading culprit in North Texas homes.
- Discoloration returning after cleaning. If you have scrubbed the same spot with bleach more than once and it keeps coming back, the moisture source is still active. The mold is feeding on something you have not found yet, and it will keep coming back until that source is corrected.
Our Process, Step by Step
- 1
Call and talk to a person. You call (682) 432-0584 and a live person answers, 24/7. No phone tree, no voicemail, no callback queue. We ask about the visible signs, how long they have been present, and any water events, then book a time.
- 2
Assessment and written scope. A background-checked, uniformed technician arrives with a tracked arrival time. We inspect the affected area, use meters and infrared to map hidden moisture, and hand you a written scope of work with a firm price before any tool comes off the truck.
- 3
Containment and air filtration. We seal the work area with 6-mil polyethylene, set up negative air pressure using HEPA-filtered air scrubbers, and mark the containment zone. This keeps spores from migrating into clean areas of your Fort Worth home.
- 4
Removal, treatment, and drying. Affected materials are removed in contained bags. Remaining surfaces get HEPA-vacuumed, scrubbed with an EPA-registered antimicrobial, and dried using professional equipment from Dri-Eaz, Phoenix, XPOWER, B-Air, or Injectidry. We track moisture with psychrometric readings, which means we measure the air’s moisture level so we know when your home is truly dry, not just surface-dry.
- 5
Verification, photos, and guarantee. We run clearance testing when the job calls for it, and we text you before-and-after photos at every stage. You get a written 365-Day Done Right Promise covering the work. If it is not done right, we make it right.
How Much Does Mold Remediation Cost in Fort Worth?
A typical mold remediation project in Fort Worth runs $1,800 to $5,500; see our Mold Remediation cost guide for more detail. A contained bathroom ceiling or small closet runs $500 to $1,500. A full room with drywall removal, drying, and clearance testing lands between $1,500 and $4,000. Multi-room remediation, crawlspace work, or HVAC duct involvement starts around $6,000 and can exceed $10,000 on large homes in areas like Tanglewood or Monticello where square footage and finish materials add up. What drives the price: the square footage of affected material, whether the mold is in walls or in structural lumber, the length of time drying equipment runs, and whether lab sampling and clearance testing are required. What does not drive the price: our mood on the day we show up. The written scope you approve is the price you pay.
To avoid overpaying, be wary of any contractor who quotes by the room without seeing the job, or who refuses to put a scope in writing. Also be wary of the opposite problem: a quote so low it clearly does not include containment, which just means you will pay twice when the mold returns. Every free estimate from Wendell Restoration Fort Worth includes a written line-item scope, a moisture assessment, and a clear explanation of what is actually necessary versus what can wait.
Our Service Area Near Fort Worth
Wendell Restoration Fort Worth serves the entire Fort Worth metro area, including mold remediation in Haltom City, mold remediation in Benbrook, Hurst, Watauga, White Settlement, Forest Hill, Kennedale, Pecan Acres, River Oaks, Sansom Park, and Lake Worth. Most of our Fort Worth calls get a same-day or next-day visit. The full service area and driving times are on our home page, and you can reach us 24/7 at the number above. For the complete breakdown of what to expect on your specific street, read our detailed guide to mold remediation in Fort Worth.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Mold Remediation in Fort Worth
Mold remediation is the process of removing active mold growth and correcting the moisture problem that caused it. It includes containment, air filtration, material removal, antimicrobial treatment, structural drying, and verification testing. In Fort Worth, where summer humidity keeps indoor surfaces damp for months, remediation is the only approach that prevents recurrence.
Most single-room mold remediation jobs in Fort Worth take 1 to 3 days from setup to final drying. Larger jobs involving multiple rooms, crawlspaces, or structural drying can run 5 to 7 days. You will have a firm timeline in writing before work starts, and photo updates by text throughout the job. Call (682) 432-0584 to get a specific timeline for your situation.
In Fort Worth, plan on $1,800 to $5,500 for a typical project. Small contained areas like a bathroom ceiling run $500 to $1,500, while multi-room jobs or crawlspace work start around $6,000. The exact price depends on square footage, material type, and drying time, and you will have a written price before any work starts. Estimates are free, and the price you approve is the price you pay.
Yes. If a previous restoration company left drying equipment behind, we will assess whether it is running correctly and complete the job properly. We use Dri-Eaz, Phoenix, XPOWER, B-Air, and Injectidry equipment on our own projects, and we know how each brand performs in Fort Worth’s humidity conditions. Call (682) 432-0584 to schedule an assessment.
Yes. A live person answers our phones 24/7, including weekends and holidays. If you have active water entering your home along with mold, we can usually have a technician on site the same day you call. Water damage does not keep business hours in Fort Worth, and neither does Wendell Restoration Fort Worth.
Every mold remediation job includes the 365-Day Done Right Promise in writing. If the work is not done right, we make it right, and you get a free second visit if the repair fails. That promise covers the remediation work we performed, and it is stated clearly on every invoice. Clearance testing results are included in the documentation.
Clear a path to the affected area and move small items away from the walls. We handle everything else, including containment setup, furniture moving within the work zone, and daily cleanup. If you have pets, keep them out of the work area during the job. Your technician will walk you through the plan before we start, and you will know exactly what to expect.
Schedule Your Mold Remediation Service in Fort Worth Today
Call (682) 432-0584 and talk to a real person who can book your visit, answer your questions, and get a technician on the way. You will get a written price before any work starts, a live arrival time you can track, and before-and-after photos by text. No obligation, no pressure, no vague promises. Just mold remediation in Fort Worth done the Wendell way.
Written by Blake Sorensen, Owner at Wendell Restoration Fort Worth, serving Fort Worth since 2006.