Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateTrusted Water Damage Repair for Fort Worth Homeowners
Water damage repair in Fort Worth means restoring a home after water has soaked into drywall, flooring, framing, or ceilings, and stopping the secondary damage that follows if you wait: warped wood, swollen baseboards, bubbling paint, and mold that starts in as little as 48 hours. Wendell Restoration Fort Worth has answered water damage calls across Fort Worth since 2006, with IICRC-standard drying protocols and professional equipment from Dri-Eaz and Phoenix on every truck. We answer the phone live, 24/7, at (682) 432-0584, and you’ll get a written price before any work starts, not after. Whether it’s a supply line that let go overnight in Ridglea or a dishwasher flood in Wedgwood, we show up with a live arrival time you can track and before-and-after photos sent to your phone.
Water Damage Ceiling
Water Damage Ceiling repair addresses what happens when water from a roof leak, burst pipe, or overflowing tub above saturates the drywall or plaster between floors, leaving brown rings, sagging panels, or paint that’s starting to peel away. In Fort Worth, ceiling damage is common after the heavy spring storm season hammers older composition roofs in neighborhoods like Arlington Heights and Mistletoe Heights. We find the moisture boundary with thermal imaging, cut out only what’s saturated, and dry the rest with Phoenix axial fans and dehumidifiers placed to pull moisture down through the cavity. Typical Fort Worth Water Damage Repair ceiling work runs $400 to $1,200 depending on how much drywall has to come out and whether the joists above need supplemental drying. The 365-Day Done Right Promise covers the repair in writing, and that written guarantee is included on every single job.
Ceiling Stain Assessment
A brown ring on a Fort Worth ceiling doesn’t always mean active water. Sometimes it’s an old stain from a leak that was patched years ago. We use a moisture meter to tell the difference in about thirty seconds, so you’re not paying to open a ceiling that’s already dry.
Collapsed Ceiling Response
When a ceiling comes down from saturated drywall, the debris has to go before drying can start. We handle the full sequence, removal, drying, and rebuild, with the price in writing before we touch the room.
Restoration work we handle
Burst Pipe Repair
Burst Pipe Repair is the emergency work that follows a frozen or failed supply line, when pressurized water has sprayed into walls, ceilings, or crawl spaces and the first job is stopping the source before extraction and drying begin. Fort Worth’s winter freezes, like the February 2021 event that ruptured pipes in thousands of homes from Fairmount to Handley, make this one of the most common calls we take. Wendell Restoration Fort Worth coordinates with a licensed plumber to isolate the break, then we extract standing water, remove saturated drywall and insulation, and set drying equipment under IICRC protocol. Burst pipe repair in Fort Worth typically runs $1,500 to $4,500 when walls and flooring are involved, with the final number written down before work starts, no exceptions. You’ll never get a price that changes at the door.
Pipe Break in an Exterior Wall
Exterior wall breaks mean insulation is soaked and has to come out, because wet insulation holds moisture against framing for weeks. We cut a clean access panel, remove the saturated batt, and dry the cavity to a target moisture content before new insulation goes back in.
Second-Story Pipe Failure
A burst pipe upstairs doesn’t stay upstairs. Water travels down the inside of wall cavities and pools in the ceiling below. We inspect both levels on every two-story home, because the visible puddle on the first floor is rarely the full extent of the damage, and our Hurst Water Damage Repair crews handle the same careful two-level checks.
Water Damage Hardwood Floors
Water Damage Hardwood Floors repair is the work of saving solid or engineered wood flooring after a flood, leak, or appliance overflow has caused cupping, crowning, or staining in the planks. Fort Worth homes built in the 1920s through 1950s, especially in Berkeley Place and Ryan Place, often have original oak floors that are worth saving, and we approach every board with that in mind. Wendell Restoration Fort Worth uses Injectidry systems to pull water out from beneath the wood through small access ports, rather than ripping everything up on day one. Hardwood floor drying and repair in Fort Worth generally runs $800 to $3,000 depending on square footage, flooring type, and whether the subfloor has been affected. We tell you in writing whether your floor is a drying candidate or a replacement candidate before any equipment goes down.
Cupped Floorboard Recovery
Cupping is when plank edges lift higher than the center, and it’s the wood’s natural response to moisture imbalance. With controlled drying and humidity management, many cupped floors settle back close to flat within weeks. We photograph every stage so you can see the recovery happening.
Subfloor Drying Under Solid Wood
Solid plank flooring nailed over a wood subfloor traps water between the two layers, which is where real rot starts. Our Injectidry panels pull that trapped moisture out through the wood itself, which is faster than waiting for it to evaporate upward and far less destructive than pulling up the whole floor.
Water Damage Repair Contractors
Water Damage Repair Contractors are the licensed, insured professionals who handle the full sequence of water extraction, structural drying, material removal, and repair or rebuild, and the difference between companies is mostly in how they communicate and what they put in writing. Wendell Restoration Fort Worth has done this work in Fort Worth since 2006 as part of the Relay Home Co. family, and every location is independently owned and operated to The Relay Visibility Guarantee. That means you know who is coming, when they’ll be there, and exactly what it costs before the first tool comes off the truck. Hiring a contractor for water damage repair in Fort Worth typically means paying $2,000 to $8,000 for a full-scope job, and we’d rather give you a written, line-item price for that than a vague verbal estimate. Background-checked, uniformed technicians arrive with a live arrival time you can track on your phone, just like a rideshare.
What to Ask Before You Sign
Ask any contractor three questions: is the price in writing before work starts, is the drying protocol IICRC-standard, and do you guarantee the repair. If any of those questions gets a vague answer, keep looking. We answer all three with a yes, in writing, on every single job.
License and Insurance Verification
Any legitimate water damage repair contractor in Texas carries general liability coverage and can show you proof on request. We’re insured and bonded, and we’re happy to send you our COI before you sign anything. No reputable contractor will hesitate on that request.
Burst Pipe Cleanup
Burst Pipe Cleanup is the immediate removal of standing water, soaked materials, and surface contamination after a pipe ruptures, before structural drying can begin in earnest. This work has to happen fast, because water sitting on Fort Worth slab foundations or inside wall cavities keeps wicking upward and outward, turning a two-room cleanup into a whole-house project within days. Wendell Restoration Fort Worth arrives with truck-mounted extraction and XPOWER and B-Air air movers to get water up and air moving on the same visit, and our Water Damage Repair - Haltom City team uses the same equipment setup. Burst pipe cleanup in Fort Worth typically starts around $900 and runs to $2,800 depending on the affected square footage and whether carpet, pad, or drywall has to be removed. The price is in writing before we start extraction, and the number on the screen is the number you pay.
Standing Water Extraction
Every hour water sits on flooring, it’s seeping deeper into the slab, the subfloor, and the wall plates. Our extraction equipment moves several hundred gallons per hour in most homes, and we run it until the floor is visibly clear before drying equipment goes down.
Contaminated Water Handling
A burst clean-water supply line is fundamentally different from a sewer backup or washing machine overflow with detergent residue. We categorize the water according to IICRC standards and treat the affected area accordingly, including antimicrobial application when the category calls for it, not as a default upcharge.
Drywall Water Damage Repair
Drywall Water Damage Repair is the process of removing saturated gypsum board, drying the framing behind it, and reinstalling and finishing new drywall so the repair is invisible and structurally sound. Drywall acts like a sponge, and once it has wicked water, it loses its rigidity and becomes a mold food source, so in most Fort Worth homes the correct move is cutting it out 12 to 18 inches above the visible water line. Wendell Restoration Fort Worth handles the full sequence, cut, dry, replace, tape, float, texture match, and paint, under one written price. Drywall repair after water damage in Fort Worth usually runs $500 to $1,800 per affected room, with the final scope driven by how high the water wicked and whether insulation behind the wall also has to come out. You’ll see before-and-after photos by text so you know exactly what was opened and what was closed back up.
Flood Cut Precision
We cut straight, level lines so the replacement drywall seams land cleanly and the finish work is easier to hide. A ragged rip-out makes for a patchy repair. We take the extra ten minutes to do it right because the 365-Day Done Right Promise is on this work.
Texture Match and Paint
Fort Worth homes run the full range of wall textures, from smooth in mid-century moderns to heavy knockdown in 1990s subdivisions. We match the existing texture and prime before painting, so you’re not left with a visible patch that reminds you of the flood every time you walk past it.
Water Damage Inspection
Water Damage Inspection is the diagnostic step where we determine the full extent of moisture spread, the category of water involved, and the specific drying plan needed, using moisture meters, thermal imaging cameras, and hygrometers to measure both surface and in-cavity conditions. Most Fort Worth homeowners call us when they can see the damage, but the real determinant of cost and scope is what’s hidden inside walls and under floors. Wendell Restoration Fort Worth includes a full inspection with every job we quote, not as a separate line item, and we’ll show you the readings as we take them. A standalone water damage inspection in Fort Worth runs $150 to $350 when you’re not committing to repair work yet, and if you do hire us, that inspection cost rolls into the job. The written scope you get after inspection is the price, and it doesn’t change unless we find something you specifically authorize in writing.
Thermal Imaging Scan
Thermal imaging shows temperature differences that reveal moisture behind walls without opening anything up. We scan every affected area and the rooms next to it, because water travels sideways through wall cavities in ways a visual check will never catch.
Moisture Content Mapping
We take readings at floor, mid-wall, and ceiling height in a grid pattern across every affected room, then document the numbers. This gives us a drying baseline and proves to your adjuster, with data, what was actually wet versus what was simply adjacent to the wet area.
Brands We Service
We deploy Phoenix and Dri-Eaz drying equipment on the majority of our Fort Worth water damage repair jobs, and our technicians are trained on the specific operational specs of each. Phoenix axial fans are workhorses for pushing air across wet flooring and into wall cavities, and their low-profile design fits under cabinets and in tight basements where bigger units won’t go. Dri-Eaz dehumidifiers, particularly their LGR refrigerant models, pull moisture out of the air at a rate that low-grain units simply can’t match, which is why we keep them on every truck.
We also use XPOWER and B-Air air movers when the job calls for compact, high-velocity drying in confined spaces, and Injectidry systems for hardwood floor and subfloor work. Whether you have a specific brand preference from a previous restoration or you just want the job done right, we’ll bring the right equipment for your specific Fort Worth home and the moisture problem it’s facing.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Visible water or standing puddles that won’t stop spreading. A slow spread means the source is still active, and every hour it continues means more flooring and drywall that has to be removed and replaced. Shut off the water at the main if you can, then call us at (682) 432-0584 while you’re standing there.
- A musty or earthy smell that appeared suddenly. That smell is microbial activity starting, and it usually means moisture is trapped somewhere you can’t see, behind a wall, under a cabinet, inside the floor assembly. The longer it’s trapped, the more extensive the repair.
- Baseboards that are swelling, warping, or pulling away from the wall. Baseboards sit at the lowest point of every wall, so they’re the first place trapped water shows up. If they’re lifting and you didn’t have a visible spill, you have a leak you haven’t found yet.
- Paint that’s bubbling, blistering, or peeling in one concentrated area. Water pushing through drywall from behind will separate the paint film from the surface. By the time you can see it, the drywall behind is already saturated and likely needs to be cut out.
- A water bill that spiked with no change in your normal usage. Fort Worth Water can usually show you a daily usage graph, and a sudden jump often means a slab leak or a running supply line inside a wall. We can inspect and find it with thermal imaging before the damage gets bigger.
Our Process, Step by Step
- 1
Call, talk to a live person, and get a tracking link. When you call (682) 432-0584, a live person answers, not a voicemail or a phone tree. We book the visit, and you get a live arrival time you can track on your phone, so you know exactly when your technician is pulling up.
- 2
Inspection and moisture mapping with real data. The technician arrives in uniform, background-checked, and starts with a full inspection using thermal imaging and moisture meters. You see the readings, we explain what they mean in plain language, and we mark the affected area so the scope is visible and agreed on.
- 3
Written scope and price, before any work starts. You get a written, line-item price for the entire job before we remove a single piece of drywall or set a single fan. The number on the screen is the number you pay, and the 365-Day Done Right Promise is included on every repair, in writing.
- 4
Extraction, drying, and removal with pro-grade equipment. We extract standing water, remove saturated materials that can’t be saved, and set Phoenix and Dri-Eaz drying equipment to bring the structure to target moisture content. You get photo updates by text as the work progresses, so you’re never guessing what’s happening in your own home.
- 5
Rebuild, finish, and verify, with a final photo set. Drywall goes back up, texture is matched, flooring is repaired or replaced, and we do a final moisture verification to confirm the structure is dry. You get a final photo set and a digital invoice you can pay from a link, with a written guarantee on the repair.
How Much Does Water Damage Repair Cost in Fort Worth?
A typical water damage repair project in Fort Worth runs $2,000 to $8,000, with smaller isolated jobs like a single ceiling patch or a small drywall cut-out landing in the $400 to $1,200 range. The biggest drivers are the square footage affected, whether the water reached wall cavities or subflooring, the category of water involved, and whether hardwood or tile replacement is required. A burst pipe in a bathroom wall that sat overnight might run $1,500 to $3,000, while a whole-home supply line failure with multiple rooms affected can push past $8,000. Our inspection is always part of the quote, and the written price we give you after moisture mapping is the price you pay, no change orders unless you approve something extra in writing.
Avoid overpaying by being present for the inspection and asking to see the moisture readings yourself. A reputable Fort Worth contractor will show you the numbers and explain where the water actually went, not just point at the visible stain and wave a big number at you. Our free estimate includes the full inspection, the written scope, and the written 365-Day Done Right Promise, all before you commit to anything. Call (682) 432-0584 and we’ll walk the property with you, show you the readings, and hand you a printed price on the spot.
Our Service Area Near Fort Worth
Wendell Restoration Fort Worth covers the entire Fort Worth metro, from Water Damage Repair in Haltom City to Water Damage Repair in Benbrook, plus Hurst, Watauga, White Settlement, Forest Hill, Kennedale, Pecan Acres, River Oaks, Sansom Park, and Lake Worth. Most of these areas get a technician on site within 60 to 90 minutes of your call, and we’re answering the phone live at (682) 432-0584 around the clock, because water doesn’t wait for business hours and neither do we.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Water Damage Repair in Fort Worth
Water damage repair is the full process of extracting standing water, drying the affected structure to target moisture levels, removing materials that can’t be saved, and rebuilding drywall, flooring, and ceilings to their pre-loss condition. In Fort Worth homes, it usually means a combination of water extraction, dehumidification, flood cuts on drywall, and replacement of flooring or insulation that absorbed water, and our Water Damage Repair in Kennedale follows the same full process. The repair side specifically refers to the rebuild work that comes after mitigation, and it’s the part covered by our 365-Day Done Right Promise in writing.
Most water damage repair projects in Fort Worth take 3 to 7 days from first call to final finish, with drying typically running 3 to 5 days and rebuild work following after the structure is verified dry. Small jobs like a single ceiling patch can be done in a day or two, while larger multi-room jobs may run a week or more depending on material availability and drying conditions. We give you a written timeline with your written price, and you’ll get photo updates by text throughout.
Water damage repair in Fort Worth typically costs $2,000 to $8,000 for a full-scope job, with smaller isolated repairs running $400 to $1,800 depending on what was affected. The exact price depends on square footage, how far the water spread through walls and floors, and what materials need to be replaced. We put the exact price in writing before any work starts, so you’ll never get a surprise number at the end.
Yes, and this is where our documentation process really matters. We provide photo evidence, moisture readings, and a written scope that makes it clean and simple for your adjuster to process the claim, and we can coordinate directly with your insurance company if you’d prefer. Many Fort Worth homeowners use us specifically because the photo documentation and drying logs we provide stand up to adjuster scrutiny. Call (682) 432-0584 and we’ll walk you through how the insurance conversation works on your specific policy.
Yes, a live person answers our phone 24 hours a day, 7 days a week, including holidays and the middle of the night. Water damage doesn’t keep business hours, and neither do we, so when a pipe bursts at 2 a.m. in Wedgwood, you’re talking to a real person who can dispatch a crew that night. The number is (682) 432-0584, and it’s always answered by a person, never a voicemail.
Every repair we do in Fort Worth comes with the 365-Day Done Right Promise in writing, which means if the repair isn’t done right within a year, we make it right at no cost to you. It’s not a verbal assurance, it’s a written guarantee included on every single job. We also include a free second visit if the repair fails, so you’re never stuck chasing a contractor who vanished after the invoice was paid.
First, shut off the water at the main if the leak is active, and if you can safely reach the breaker, cut power to the affected area, but only if you can do so without standing in water. Move small valuables and electronics out of the wet zone if it’s safe, and avoid walking on saturated carpet or flooring more than necessary, because foot traffic pushes water deeper into the subfloor. Then just wait for us, we’re on the way, and you can track our arrival time on your phone.
Schedule Your Water Damage Repair Service in Fort Worth Today
Water damage spreads, and every hour it sits, the repair gets bigger and more expensive. Call (682) 432-0584 now and you’ll talk to a live person who can dispatch a background-checked technician to your Fort Worth home with a live arrival time you can track. You’ll get a free inspection, a written price before any work starts, and photo updates by text, all backed by the 365-Day Done Right Promise in writing.
Written by Blake Sorensen, Owner at Wendell Restoration Fort Worth, serving Fort Worth since 2006.